| After-sales Service: | 24 Hours After-Sales Service |
|---|---|
| Warranty: | 1 Years |
| Thickness of Coild Plate(mm): | 1-6 |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier W11s upper roller Universal Plate Rolling Machine is a new type of rolling machine produced by the introduction of advanced technology at home and abroad, combined with the actual situation in China. The machine belongs to the hydraulic three-roll rolling machine, which carries out pre-bending through the horizontal movement of the upper roll. And then the low carbon steel, low alloy steel is rolled into a cylinder shape at room temperature.
| No. | Model:W11S-12×2500 | Paremeter | Unit |
| 1. | type | Upper roll numerical control (economy type) | |
| 2. | Add pressure | 75 | T |
| 3. | Maximum plate width | 2500 | mm |
| 4. | Working length of roller | 2550 | mm |
| 5. | Maximum plate thickness curved end | T10×B2500×¢min 550σs≤245Mpa) | mm |
| 6. | Maximum plate thickness central | T12×B2500×¢min550(σs≤245Mpa) | mm |
| 7. | Full load remaining straight edge length | ≤2 times plate thickness | |
| 8. | Diameter of upper roll | ¢260 | mm |
| 9. | Lower roll diameter | ¢150 | mm |
| 10. | Two roll center distance | 245 | mm |
| 11. | Coil speed | About 4.5 | m/min |
| 12. | Pressure rate of upper roller | About 120 | mm/min |
| 13. | Diameter of supporting roller | ¢180 | mm |
| 14. | Number of supporting rollers | 3 | Piece |
| 15. | Number of idlers | 1 | Set |
| 16. | Main motor power | 7.5 | KW |
| 17. | Hydraulic motor power | 4 | KW |
| 18. | Mobile motor power | 1.5 | KW |
Tipping frame using hydraulic tipping; Vertical displacement of upper roller adopts hydraulic transmission, horizontal movement adopts mechanical transmission. The equipment has high reliability, stable operation, flexible control, no jamming, oil leakage and abnormal noise.
High precision. The machine adopts the drum shaped roller and the smaller diameter of the lower roller, the lower roller can be adjusted up and down the lower part of the support roller.
The control circuit adopts PLC programmable controller system, less relay, precise action, long service life.
The NC system has the functions of real-time monitoring, in-place control and short electrical memory in the rolling process.
Widely used in petroleum, chemical industry, boiler, shipbuilding, hydropower, metal structure and machinery manufacturing industries
The machine is mainly composed of upper roller device, lower roller and horizontal moving device, idler roller device, main transmission system, tipping device, frame, balancing device, chassis and other parts.
1. Upper roller device
The upper roller device is composed of upper roller, main oil cylinder, upper roller bearing seat and double-row self-aligning bearing.
2. Lower roller and horizontal moving device
The lower roll device is composed of the lower roll, the lower roll bearing seat, the lower roll sliding bearing, the lower roll input gear and so on.
3. Roller device
The roller device is composed of roller combination, wedge mechanism and screw mechanism.
The adjusting screw drives the two sets of wedges to move closer or apart, so that the combination of idlers can be raised or lowered.
The idler roller is made of 45 steel, quenched and tempered, and its hardness is lower than that of the lower roller.
4. Main drive system
The main transmission system is composed of main motor, reducer, output gear and so on.
5. Tip over device
The overturning device is composed of pin shaft, ram, overturning hydraulic cylinder, support and so on.
6. Balance device
The balance device consists of two pull rods and a balance beam.
We have cooperated with experienced shipping forwarders for many years, they arrange the shipment. No matter by express, by air or by sea, we will track the course of the goods all the way, to make sure goods arrive at you on time and in good condition.
We support online maintenance and offline engineer guidance at the factory.
SHANDONG RAINTECH SANS TECHNOLOGY co., LTD is a professional group for CNC machines with more than 13 years experience.
Plant now covers an area of more than 12000 square meter, annual capacity is around 200 units. Raintech have an experienced expert with young active technical team, which can provide the professional with improved design solutions for our customers, assure that can satisfy various customer's special requirements by cost- effective way.
♥1.How to operate the machine ?
We will deliver English manual and video with the machine to you. lf you still need our help,please contact us.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}